Spray Foam Cost & R-Value | Insulation Contractor NY
All the Good Things You Can Get from Spray Foam When it comes to home construction and renovation, we all know that there are a lot of things that you have to put in mind. Among the most important ones is the insulation that you are going to get. There are a lot of options for you but it does not make the whole thing of selecting any easier.
You need to be very careful in choosing because not all of them is suitable in delivering you what you need. There are even affordable products but they will not really provide you a good solution because it will take its effect only for a short-term basis. There are other more expensive products but you may be too reluctant to buy them because of their price but take note of the fact that using them will enable you to save a lot from the utility bills that you could have paid for. It is very important that you understand all the differences between the different types of insulation that you can use so that your decision will be guided.
Here we are going to talk about one of the must-try types of insulation.
Spray foam has been used for quite a while now but there are still some of use who don't know what it can do. The first thing that we have to know about it is that it is actually one of the most efficient home insulators that we can have in our homes. You can buy it in different types so that your application preferences will be catered. The Spray Foam insulator is made of two compounds. Prior to mixing, these two compounds can be stored for a longer amount of time. But once you've mixed them, you have to use it because the substance will start to form the foam. Once it is ready, it is then sprayed on to the area. It will not take long to set in place and harden. As a result, you will have an effective insulating layer that is very durable.
For you to be able to tell if the insulation is reliable, all you have to do is look at its R-value. Those that have high R-value usually have higher effectiveness. This is because of the fact that higher values mean higher density.
The open cell Spray Foam is known to have the lowest R-value.
- Open Cell Spray Foam R-Value- 3.7 (at 1")*
- Closed Cell Spray Foam R-Value- 6.9 (at 1")*
Get Spray Foam Insulation Cost “Price” Per Square Foof.
- Open Cell Spray Foam $0.40 To $0.65 Per Board Foot
- Closed Cell Spray Foam $0.90 To $1.10 Per Board Foot
- Minimum Service Charge Per Job is $2.100 To $2.500
Depending on Your Job and Situation
Most of the spray foams that we can get usually have R-values of 6 to 7.7
When compared to the fiberglass batting whose R-value is 3.5, there is no doubt that the Spray Foam can offer you a much better insulation. Another great thing about the Spray Foam is that it is very easy to use and so if you were not ale to try it yet, now is the right time.
Spray Foam lasts longer than traditional sheet or blown insulation and insulates a home more thoroughly. Compared to cheaper versions of insulation, such as fiberglass, the installment fees for Spray Foam can be much higher and cut into a building or renovation budget considerably.
Spray Foam actually seals the entire “building envelope” of your home, eliminating drafts and reducing radiant energy, This means that the cracks and crevices found naturally in your home around wall sockets, windows and doorways allow drafts into your home will be sealed to prevent air and moisture infiltration.
Spray foam insulation can quite literally pay for itself in as little as 7 to 9 years.